Tuesday, Jul 02 2024

179C-0402 Dixon Valve Brass Compression Fitting - 45 deg. Elbow

By A Mystery Man Writer

179C-0402 Dixon Brass Compression Fitting is a 45 deg. Elbow, with a 1/4" Tube Size x 1/8" Pipe Thread. The fitting is for use with copper, aluminum and Parflex thermoplastic tubing. Manufactured for low and medium pressure tubing connection wor

Advantages:
No flaring, soldering or other preparation of tubing necessary to assemble. Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved.
Specifications:
Underwriter's Laboratories listed for flammable liquid. Compression fittings meet functional requirements of SAE J-512 and ASA.
Assembly Instructions:
Slide nut, then sleeve onto tubing. The thread end of the nut must face out. Insert the tube into the fitting. Be sure the tube is bottomed on the fitting shoulder. Assemble nut to body, and tighten hand-tight. Then follow the number of wrench turns as indicated in the table to the right.

Fitting Size	Tube Size	Turns Required to Seal from Hand-Tight
Fitting Size	Tube Size	60C Series with Soft Metal Tubing	60PT Series with Thermoplastic Tubing
2	1/8	1-1/4	-
3	3/16	1-1/4	-
4	1/4	1-1/4	2
5	5/16	1-1/4	2
6	3/8	2-1/4	2
8	1/2	2-1/4	2
10	5/8	2-1/4	2
12	3/4	2-1/4	2
14	7/8	2-1/4	-

Part Number	Tube Size	Pipe Thread	Material	Weight (Lbs)
179C-0402	1/4	1/8	Brass	0.0435
179C-0404	1/4	1/4	Brass	0.0800
179C-0602	3/8	1/8	Brass	0.0823
179C-0604	3/8	1/4	Brass	0.0845
179C-0606	3/8	3/8	Brass	0.1180
179C-0806	1/2	3/8	Brass	0.1481